37
© SPX
Form No. 1000528
Rev. 1 December 2, 2011
SPX Bolting Systems
Unit 4, Wansbeck Business Park
Rotary Parkway
Ashington
Northumberland NE63 8QW
Tel: +44 (0) 1670 850580
Fax: +44 (0) 1670 850655
spxboltingsystems.com
We declare that this product complies with the appropriate ESR’s of the following directives,
2006/42/EC•
Where appropriate the requirements of the following standards have been invoked,
EN 292/2/91•
Product description: HYDRAULIC TORQUE WRENCH.
Model type: TWSD1, 3, 6, 11, 25 SQUARE DRIVE TORQUE WRENCH.
In addition, the goods supplied have been classied as falling into the Sound Engineering Practice
(SEP) category according to the EC Pressure Equipment Directive (PED) 97/23/EC.
SPX Bolting Systems is the person authorised to compile the technical le.
SPX Bolting Systems, the manufacturer / supplier, undertake to transmit and / or make available in
response to reasoned request, technical le details and other relative information to EEC National
Authorities, in electronic or hard copy format
Installation and operation of this equipment must be in accordance with the installation and operating
instructions provided. This product must not be put into service until the machinery into which it is
incorporated has been declared in conformity with the provisions of the above directives.
The Company Directors are the equally responsible persons. The person named below is empowered
to act as signatory on behalf of the Company Directors
Signed:
Printed: DAVID CAMPBELL Date: 2nd December 2011
Declaration of Incorporation
To Previous Page
Loading...
