5
© SPX
Form No. 1000528
Rev. 1 December 2, 2011
Do not subject the hose to potential hazard, such as re, sharp surfaces, heavy •
impact, or extreme heat or cold. Do not allow the hose to kink, twist, curl, or bend
so tightly that the uid ow within the hose is blocked or reduced. Periodically
inspect the hose for wear, because any of these conditions can damage the hose and
possibly result in personal injury.
Do not use the hose to move attached equipment. Stress can damage the hose and •
possibly cause personal injury.
Hose material and coupler seals must be compatible with the hydraulic uid used. •
Hoses also must not come in contact with corrosive material such as creosote-
impregnated objects and some paints. Consult the manufacturer before painting a
hose. Never paint the couplers. Hose deterioration due to corrosive materials may
result in personal injury.
Safety Precautions continued
To Next Page
Loading...
