EC Declaration of Conformity
Manufacturer of Equipment:
Pipeline Inspection Co. Ltd.
Authorized Representative in the EC Community:
Pipeline Induction Heat LTD
The Pipeline Centre Farrington Road
Rossendale Road Industrial Estate
Burnley, Lancashire BB11 5SW
England, United Kingdom
Attn: Michael Burnley
Description of Equipment:
Holiday Detectors
Models 780, 785, 790 and accessories
Holiday detectors are devices that are used to detect the presence of
defects in the non-conductive coatings applied to surfaces in order to
minimize ion flow from a conductive substrate. This is accomplished by
attempting to create an electrical circuit by passing an electrode over the
non-conductive coating. A sufficient voltage is generated in the
electrode to cause a spark that will jump from the electrode to the
substrate if a defect is found. When a defect is found a horn will sound
and a light will turn off.
Specifications: The products mentioned above were submitted as
a common family as they utilize common designs, components and meth-
ods of construction. Representative tests were performed on each device
that would exhibit the “worst case” scenario for approval.
To Next Page
Loading...
