SPY 780 - Page 8

Carrying Strap
CAUTION! DO NOT TOUCH the electrode or
ground wire while detector is operating.
Shoulder strap connection
Spring or brush
electrode connection
Built in Jeepmeter with digital
readout to verify setting
Easy carry top handle
Positive ground light
8 hour battery
To attach the carrying strap, first snake
the clip under the handle from the front,
insert the tab into the top center groove on
the front handle, and then snap the clip
around the front handle. The strap is
clipped between the front handle clip and
the pin in the rear handle at the top.
Comfortable grip
Ground cable enters here
8