SR Suntour RL - Page 2

SR SUNTOUR / HOW TO CHECK & REPLACE / RL , RL-R CARTRIDGES
2
HOW TO CHECK & REPLACE RL / RL-R CARTRIDGES
REQUIRED TOOLS & SUPPLIES:
• 10mm socket
• 5mm Allen key
• 2mm Allen key
• Torque wrench
• Mallet
• Plastic (tire) lever
• Small  at (slotted) screw driver
• Lockout system removal tool (FAA122)
WARNING
Always wear safety glasses and protective gloves during the maintenance of SR SUNTOUR products.
GENERAL INFORMATION
All forks can be identifi ed by the setting buttons.