SR Suntour ZERON36 - Zeron36 Series Introduction

4SR SUNTOUR / ZERON36 / ZERON36X / SETUP GUIDE / ENGLISH
IMPORTANT SAFETY INFORMATION
• Read this manual thoroughly before using your
suspension system.
• These instructions contain important information
about the correct installation, service and
maintenance of your suspension fork.Common
mechanical knowledge may not be sufcient. Your
suspension fork should be only be installed, serviced
and/or maintained by a trained and qualied bicycle
mechanic with specialized tools.
• Our suspension systems contain uids and gases
under extreme pressure. Never try to open any
SR SUNTOUR suspension system! Pieces can be
violently ejected.
• SR SUNTOUR suspension forks are designed
as a single integrated system. To avoid product
malfunction and an accident, use only genuine
SR SUNTOUR spare parts. The use of third-party
supplier spare parts also voids the warranty of your
suspension system.
• Your suspension fork is not intended for jumps,
aggressive downhill rides, freeride or dirt jumping
if the warning sticker on your suspension system
prohibits these activities. Disregarding these
instructions may cause your suspension fork to fail,
resulting in an accident, personal injury or death, and
will void the warranty.
BEFORE EVERY RIDE
• lnspect your bicycle and suspension system including
the handlebars, pedals, crank arms, seat post, saddle,
etc. For any cracks, dents, bent or tarnished parts,
Also search for any oil leaking out of your shocks. Be
sure to check hidden areas on the underside of your
bike. lf any condition exists, consult a trained and
qualied bicycle mechanic to determine the cause
and make any necessary correction.
• Compress your suspension system with your body
weight. lf it feels too soft, make the necessary
adjustments until you have reached the correct SAG
value. Please also see the instruction in this manual
regarding SAG.
• Make sure your brakes are properly installed/adjusted
and work correctly.
• Spin the wheels. Make sure that wheels are perfectly
centered and do not contact the suspension fork or
brakes.
• lf you are using a quick release system to fasten your
wheel set, make sure that all levers and nuts are
properly tightened. In case you are using a through
axle system, make sure that all xing bolts are
tightened with the appropriate torque values. Strictly
follow the instructions provided by the manufacturer
of the quick release or through axle system.
• SR SUNTOUR suspension fork is designed for use by
a single rider.
• Select the correct suspension fork according to your
frame's dimensions and your personal riding style.
lnstalling a suspension for which does not match the
geometry of your frame could result into a failure
of the suspension fork or frame could result into a
failure of the suspension fork or frame itself and will
void the shocks warranty. Failure of the suspension
fork or frame ltself and will void the shocks warranty.
• Know the limits of your skill and experience, and
never ride beyond them.
• Read, understand and follow all owner's manuals
provided with your bike and all of its components.
• Always be equipped with proper safety gear. This
includes a properly tted and fastened helmet.
WARNING
Carefully read, understand and follow the instructions provided in this manual, and keep it in a safe place for
future reference. If you have any doubt whatsoever regarding the use or maintenance of any SR SUNTOUR
product, please contact SR SUNTOUR. Failure to follow these warnings and instructions can result in product
malfunction, causing an accident, severe injury or death.
WARNING