i-MOTION 3 · June 2006
11
E
REPAIR WORK
Only a qualified bike dealer
should perform any necessary
work on the gear hub, shifter, and
brakes.
» Unauthorized work on your
i-MOTION 3 system could endan-
ger you and your warranty may
become void.
» Please contact your qualified bike
dealer regarding any questions or
problem you may have.
Back pedal brake
If the back pedal brake is braking
too hard, the brake jacket has to be
lubricated with special grease. This
work must be performed by a quali-
fied bike dealer.
Cable Change
If a cable must be replaced (shifter
cable or brake cable), contact your
qualified dealer.
WEAR PARTS
Brake liners or brake jackets, brake
cables, shift cables, handlebar
grips, sprockets, and bike chains
are wear parts. Please check these
parts regularly and replace them
timely.
MAINTENANCE AND CARE
REPAIR WORK / WEAR PARTS
To Next Page
Loading...
Need help?
General
