To Next PageTo Next Page
Need help?Do you have a question about the SRAM MTB Derailleur and is the answer not in the manual?
Ensure no gap between B-washer and derailleur hanger; push B-washer forward.
Align lower pulley with smallest cog's outboard edge for high limit adjustment.
Align upper pulley with largest cog's center for low limit adjustment.
Ensure 1-3mm distance between large chainring teeth and derailleur cage bottom edge.
Maintain approx. 1.5mm clearance between largest chainring outer edge and cage inner edge.
Ensure no gap between B-washer and derailleur hanger; push B-washer forward.
Align lower pulley with smallest cog's outboard edge for high limit adjustment.
Align upper pulley with largest cog's center for low limit adjustment.
Ensure 1-3mm distance between large chainring teeth and derailleur cage bottom edge.
Maintain approx. 1.5mm clearance between largest chainring outer edge and cage inner edge.
General| Brand | SRAM |
|---|---|
| Speed | 10, 11, 12-speed |
| Material | Aluminum, Steel |
| Weight | Varies by model |
| Cage Length | Short, Medium, Long |
