EasyManua.ls Logo

SRAM Quarq DZero User Manual

SRAM Quarq DZero
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GEN.0000000005113 Rev B
© 2017 SRAM, LLC
Basic Troubleshooting
Power Meter
Question and Answer IconNeed help?

Do you have a question about the SRAM Quarq DZero and is the answer not in the manual?

SRAM Quarq DZero Specifications

General IconGeneral
BrandSRAM
ModelQuarq DZero
CategoryMeasuring Instruments
LanguageEnglish

Summary

Power Meter Identification

DZero Platform Power Meters

Identifies DZero platform power meters and their features like green LED.

Legacy Platform Power Meters

Identifies legacy platform power meters and their features like red LED.

Quarq Power Meter Troubleshooting

Battery and Battery Compartment Issues

Addresses power meter battery drain and pairing problems.

Firmware Related Issues

Covers issues with firmware, such as LED flashing and pairing failure.

Data Reporting and Pairing Issues

Discusses problems with calibration, data gaps, and pairing to head units.

Power Measurement and Zero Offset Issues

Focuses on inaccurate power readings and zero offset value fluctuations.

DZero and Legacy Power Meter Battery Compartment Service

Parts, Tools, and Supplies

Lists necessary components, safety gear, lubricants, and common tools for service.

Battery Compartment Service Procedure

Step-by-step guide for servicing the battery compartment, including lid removal and screw tightening.

Power Meter Reboot

Procedure Using Pliers or Coins

Detailed steps for rebooting the power meter using pliers or coins to drain voltage.

Legacy Power Meter Spider Inspection Service

Legacy Battery Compartment Exploded View

Visual breakdown of the legacy power meter's battery compartment components.

Parts, Tools, and Supplies for Inspection

Lists required parts, tools, and safety supplies for spider inspection.

Legacy Power Meter Battery Compartment Removal

Important Notice on DZero vs. Legacy

Crucial warning to only perform removal on Legacy meters to avoid damage and voiding warranty.

Legacy Power Meter Battery Compartment Installation

Cleaning and Greasing Components

Steps for cleaning the compartment and applying grease to the o-ring before installation.

Aligning and Securing the Compartment

Guide to seating the clocking pin and tightening the battery compartment screw.

Related product manuals