SRAM Quarq DZero - Page 13

13Battery Compartment Removal (Legacy Power Meters Only)
Remove the o-ring between the battery compartment and
the spider.
Inspect the clocking pin hole under the battery compartment location
for damage, such as gouging or scarring.
If damage to the clocking pin hole is present, the power meter will
require inspection by Quarq®. Contact Quarq customer support or your
Quarq dealer.
Inspect the battery compartment clocking pin for damage. If the
clocking pin is worn down or broken, contact Quarq customer support
or your Quarq dealer.
3
Good condition
space between frames
space between steps
4
Damaged
Damaged
space between frames
space between steps
Good condition
5