BEFORE DRIVING YOUR CAR 1–25
WARNING
• Child restraint anchorages are
designed to withstand only those
loads imposed by correctly fitted
child restraints. Under no circum-
stances are they to be used for
adult seatbelts, harnesses or for
attaching other items or equip-
ment to the vehicle.
Anchorage Locations
Child restraint anchor fittings have been in-
stalled to coincide with the rear seating po-
sitions as follows.
WARNING
Unrestrained infants and small chil-
dren could be injured.
•
Never transport them unless they
are properly restrained.
•
Use restraint system which meet
safety standard.
•
Follow directions provided by the
manufacturer.
NOTE
Use the child restraint anchorage for
designed purpose only.
Rear seat
Australia Only
How to use child anchor
1. Fold down the seatback.
2. Engage the attaching clip of child seat
with child anchors on the wall.
3. Fold back the seatback to its original
position, then tie-up the child seat with
strap.
NOTE
•
Front seat (with Passenger Air Bag)
“It is possible to the forward facing
universal category child seat.”
•
Front seat (with Passenger Air Bag)
“It is possible install the forward
and rearward facing univesal cat-
egory child seat.”
•
Rear seat (3 points s/belt)
“It is possible to install the for-
ward and rearward facing univesal
category child seat.”
•
Rear seat (2 points s/belt)
“It is possible to install the for-
ward facing universal category
child seat.”
K140_RHD_EN_01.p65 2004-11-11, ¿ÀÈÄ 4:0825