1–26 BEFORE DRIVING YOUR CAR
Child Restraint Installation
Your vehicle has been designed to accom-
modate a child restraint on the rear seat.
When using a child restraint, read the instal-
lation instructions supplied with the child
restraint and follow the directions for fitment
carefully.
When installing the child restraint, use the
correct anchor bolt (5/16″ bolt).
The anchor bolt must be engaged at least 5
full threads in the anchorage.
The child restraint system should be se-
cured in conjunction with the vehicle’s seat
belt. After installation, push and pull the child
restraint to be sure it is secure.
CAUTION
Unused child restraint system could
move forward.
Remove child restraint system if not
in use, or secure it with safety belt.
CAUTION
Exhaust gases could enter the ve-
hicle interior.
Cover the unused anchor holes with
the supplied plug or suitable bolts.
WARNING
Loosely secured child restraint sys-
tem can cause serious injury.
•
Tighten anchor bolt firmly.
•
Anchor bolt must be engaged at
least 5 full threads in the anchorage.
•
Adjust restraint system as firmly
as possible.
•
Never use infant carrier or child
safety seat that hooks over a seat
back.
Secure the child in the restraint in accor-
dance with the manufacturer’s instructions.
If you have any queries regarding the instal-
lation of a child restraint, consult a
Ssangyong Dealer.
WARNING
Child restraint system placed in the
front seat could cause more serious
injury or death
•
NEVER INSTALL A REAR-FACING
CHILD RESTRAINT IN FRONT SEAT
WITH FRONT PASSENGER AIR BAG.
A child in a rear-facing child re-
straint installed in the front seat
can be seriously injured if the
front passenger air bag inflates.
Secure a rear-facing child re-
straint in the rear seat.
A front-facing child restraint
should be secured in the rear seat
whenever possible. If installed in
the front passenger seat, adjust
the seat as far back as it will go.
K140_RHD_EN_01.p65 2004-11-11, ¿ÀÈÄ 4:0826
To Next Page
Loading...
Need help?
General
