BEFORE DRIVING YOUR CAR 1–27
Installation of the attaching clip
Positive engagement of the child restraint
attaching clip is achieved by depressing
retainer spring and then opening of the an-
chor fitting as shown in the illustration.
Method of installation of anchor engagement
1. Child restraint anchor fitting
2. Attachment bolt
3. Lock washer
A 5/16″-UNC-2B-bolt with a thread length of
30 mm is used to attach the anchor fittings
to the vehicle anchorage.
For fitting advice, please contact your au-
thorized Ssangyong dealer.
WARNING
Child restraint anchorages are de-
signed to withstand only those loads
imposed by correctly fitted child
restraints.
Under no circumstances are they to
be used for adult seat belts or har-
nesses or for attaching other items
or equipment to the vehicle.
NOTE
Since a safety belt or child restraint
system can become very hot if it is
left in a closed vehicle, be sure and
check the seat cover and buckles
before placing a child there.
Child restraint attaching clip
To Next Page
Loading...
Need help?
General
