BEFORE DRIVING YOUR CAR 1–41
- After covering the canvas assembly
with boot, latch the fixing device of the
boot securely to the rounding parts of
the C-pillar molding hook.
NOTE
When install the boot, allow the
straps of boot to be lacated inside
the vehicle.
- Fix the both end parts of the boot by
sticking the fasteners (Velcro patch).
- After making boot’s straps go around
the rear light, fix the boot’s straps by
adhered fasteners (Velcro patch).
K140_RHD_EN_01.p65 2004-11-11, ¿ÀÈÄ 4:0841