1–42 BEFORE DRIVING YOUR CAR
- When install the side lights, after se-
curely latching the fixing device of the
lower parts of the side lights, zip the
side lights close, and then stick the fas-
teners (Velcro patch) of the side lights
to the canvas assembly.
- After closing the tailgate, check the in-
stallation of boot.
Closing (Covering) Procedure
Closing procedure is the reverse order of
opening procedure.
However, to protect the leakage of water
always observe the following precautions:
- When closing the canvas assembly, af-
ter securely latching the fixing parts of
the canvas assembly to the C-pillar mold-
ing hook, latch the canvas assembly to
the vehicle.
WARNING
• Never drive with an improperly
installed boot.
• Injury and property damage could
result.
K140_RHD_EN_01.p65 2004-11-11, ¿ÀÈÄ 4:0842
To Next Page
Loading...
Need help?
General
