ST Engineering Electronics DigiSAFE DISKCRYPT M100 - Care and Handling

G
G-P6025-TM001
Issue B
DigiSAFE DiskCrypt M100 User Manual 15
7 Care and Handling
The following are some important information on the proper care and handling of
DISKCRYPT M100. Please take a moment to review these instructions.
 As with any storage solution, it is recommended that the data of the connected
drive be backed up regularly.
 Ensure that you follow the proper removal procedure to disconnect DISKCRYPT
M100.
 Do not move or disconnect this device from your computer while it is reading or
writing data. This may cause damage to DISKCRYPT M100 and it is possible that
the data that is read from or written to the device becomes corrupted.
 Do not place this device near a heat source or expose to direct flame or heat.
 Do not place the device near to equipment generating strong electromagnetic
fields. Exposure to strong electromagnetic fields may cause the device to
malfunction or data to be corrupted.
 Do not drop or cause shock to your DISKCRYPT M100.
 Do not expose DISKCRYPT M100’s internals to water.
 Do not attempt to disassemble and service DISKCRYPT M100 yourself.