ST Engineering Electronics DigiSAFE DISKCRYPT M100 - The drive is performing very slowly

G
G-P6025-TM001
Issue B
DigiSAFE DiskCrypt M100 User Manual 21
Problem
Query
Possible reason and remedy
The drive is
performing
very slowly
Is your DISKCRYPT
M100 connected to a
USB 3.0 or 2.0 port?
To get USB 3.0 performance, ensure that
your DISKCRYPT M100 is connected to a
USB 3.0 port. The port is normally
indicated with a “SS” by the side. If not,
you may get a USB 2.0 performance.
Is DISKCRYPT M100
plugged into a USB
hub?
Connect the DISKCRYPT M100 directly to
USB 3.0 ports on your computer