ST STM32WB Series User Manual

• This document present the procedure to measure the Packet Error Rate and the RSSI between two
boards using STM32CubeMonitor-RF.
• The demonstration below uses the Nucleo Board MB1355C and the USB Dongle MB1293C
include in the STM32WB55 Nucleo Pack.
• On the two boards, the BLE stack is programmed in the M0+ and the Transparent Mode is
programmed in the M4.
Introduction
3

ST STM32WB Series Specifications

General

Brand	ST
Model	STM32WB Series
Category	Computer Hardware
Language	English