ST STM32 Nucleo User Manual

Introduction
The STM32 Nucleo-64 board, based on the MB1717 reference board (NUCLEO-C031C6 order code) provides an affordable
and flexible way for users to try out new concepts and build prototypes with various combinations of performance, power
consumption, and features.
The ARDUINO
®
Uno V3 connectivity support and the ST morpho headers provide an easy means of expanding the functionality
of the STM32C0 Nucleo open development platform with a wide choice of specialized shields.
The STM32 Nucleo-64 board does not require any separate probe, as it integrates the ST-LINK/V2-1 debugger/programmer.
The STM32 Nucleo-64 board comes with the comprehensive free STM32 software libraries and examples that are available with
the STM32CubeC0 MCU Package.
Figure 1. NUCLEO-C031C6 board (Top view)
Picture is not contractual.
STM32 Nucleo-64 board (MB1717)
UM2953
User manual
UM2953 - Rev 1 - February 2022
For further information contact your local STMicroelectronics sales office.
www.st.com

ST STM32 Nucleo Specifications

General

On-board Debugger	ST-LINK/V2-1
Microcontroller	STM32 Series (varies by model)
Connectivity	USB
Headers	Arduino Uno R3 and ST Morpho
Core	ARM Cortex-M (varies by model)
Operating Voltage	3.3V
Clock Speed	Varies depending on the STM32 MCU
Flash Memory	Varies depending on the STM32 MCU
SRAM	Varies depending on the STM32 MCU
GPIO Pins	Varies depending on the STM32 MCU
ADC Resolution	Varies depending on the STM32 MCU
DAC Resolution	Varies depending on the STM32 MCU
Communication Interfaces	SPI, I2C
Debug Interface	SWD

Summary

Ordering Information

Development Environment

Quick Start Guide

Getting Started

Step-by-step guide to begin using the board and its demo application.

Hardware Layout and Configuration Overview

Default Board Configuration

Embedded ST-LINK/V2-1

Details the integrated debugging and programming tool.

Power Supply and Power Selection

External Power Supply Input

Programming/Debugging with External Power

VCP Communication and Peripherals

Jumper Configuration

Solder Bridge Configuration

Connectors Overview

ARDUINO Uno V3 Connector

ST Morpho Connectors (CN7 and CN10)

NUCLEO-C031C6 I/O Assignment

FCC and ISED Compliance Statements

FCC Compliance Statement

States compliance with FCC rules, including Part 15.

IC Compliance Statement

Details Industry Canada compliance and RSS standards.

CE Conformity

Warning on Radio Interference

Warns about potential radio interference in residential environments.

Simplified CE Declaration of Conformity