EasyManua.ls Logo

ST STM32 ODE

ST STM32 ODE
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Version 1.1 (Jan. 30, 2017)
Quick Start Guide
STM32 ODE Function Pack for connecting 6LoWPAN IoT Nodes to
smartphone through a BLE interface
(FP-NET-6LPBLE1)
Question and Answer IconNeed help?

Do you have a question about the ST STM32 ODE and is the answer not in the manual?

ST STM32 ODE Specifications

General IconGeneral
Product CategoryDevelopment Tools
Supported MicrocontrollersSTM32
EcosystemSTM32Cube
CoreARM Cortex-M
Operating Voltage3.3V
GPIO PinsVaries by specific microcontroller
Communication InterfacesUSB, UART, SPI, I2C, CAN
PackageVaries by specific kit
Software IncludedSTM32Cube software, example projects

Summary

Bluetooth Low Energy Expansion Board (X-NUCLEO-IDB05 A1)

Hardware Description

Details about the X-NUCLEO-IDB05A1 as a BLE evaluation and development board system.

Key Products on board

Lists key components on the board: SPBTLE-RF module and M95640-R EEPROM.

Sub-1 GHz RF expansion boards

Hardware Overview (23)

Details the X-NUCLEO-IDS01A4/5 hardware, based on SPIRIT1 RF modules.

Key products on board

Lists key components: SPSGRF transceiver modules and SPIRIT1 module.

Motion MEMS and environmental sensors expansion board

X-NUCLEO-IKS01 A1 Hardware Description

Describes the X-NUCLEO-IKS01A1 as a motion MEMS and environmental sensor evaluation board.

Key Features

Highlights features like I²C bus connection, sensor address selection, and power supply lines.

Key Product on board

Lists sensors like LSM6DS0, LIS3MDL, LPS25HB, HTS221 and a DIL 24-pin socket.

BLE & 6 LoWPAN software (FP-NET-6 LPBLE1)

Software Overview

Overview of the FP-NET-6LPBLE1 function pack, its purpose, and architecture.

FP-NET-6 LPBLE1 Software Description

Explains FP-NET-6LPBLE1 as an STM32 ODE Function Pack for bridging 6LoWPAN to BLE.

Key features

Details firmware package, middleware, and sample applications for the function pack.

Setup & Demo Examples

HW prerequisites

Lists the required hardware for setup and demo examples, including expansion boards and a Nucleo board.

SW prerequisites

Lists required software, drivers, and firmware files for setup and demo examples.

FP-NET-6 LPBLE1 package structure

FP-NET-6 LPBLE1

Bluetooth low energy & 6 LoWPAN software

Shows the workflow for the FP-NET-6LPBLE1 software, from download to application.

Wireless Sensor Network Scenario

Sensors Data Transmission

Install Android Application(12)

The application validated on following Smart Phones:

Lists specific Android smartphone models validated for the application.

Install Android Application(22)

Power ON Border Router And Nodes

Execute Android Application(15)

Execute Android Application(25)

Execute Android Application(35)

Execute Android Application(45)

Execute Android Application(55)

Documents & Related Resources

STM32 Open Development Environment

STM32 Cube software (CUBE)

A set of free tools and embedded software bricks for STM32 development.

STM32 Cube expansion software (X-CUBE)

Expansion software for STM32 Nucleo expansion boards, providing abstracted access.

Compatibility with multiple Development Environments

Lists IDEs compatible with the STM32 ODE, like IAR, Keil, and GCC-based environments.

STM32 Nucleo Development Boards (NUCLEO)

STM32 Nucleo Expansion Boards (X-NUCLEO)

STM32 Open Development Environment Software components

STM32 Open Development Environment Building Block Approach

The building blocks

Categorizes building blocks for STM32 ODE into Sense, Connect, Move/Actuate, Power, Process, Software.

Your need

User needs mapped to building blocks: COLLECT, TRANSMIT, ACCESS, CREATE, POWER, PROCESS.

Our answer

STM32 Open Development Environment as the answer using building blocks.

Related product manuals