ST STM32F411

December 2014 DocID027213 Rev 1 1/35
1
UM1842
User manual
Discovery kit with STM32F411VE MCU
Introduction
The STM32F411 Discovery kit (32F411EDISCOVERY) helps you to discover the entry level
of the STM32F4 series and to develop your applications. It is based on an
STM32F411VET6 microcontroller and includes an ST-LINK/V2 embedded debug tool
interface, ST MEMS Gyroscope, ST MEMS accelerometer + magnetometer, ST MEMS
digital microphone, audio DAC with integrated class D speaker driver, LEDs, pushbuttons
and a USB OTG micro-AB connector.
Figure 1. STM32F411 Discovery board
www.st.com

ST STM32F411 Specifications

General

Brand	ST
Model	STM32F411
Category	Computer Hardware
Language	English

Summary

Introduction

Conventions

Quick start

Getting started

Step-by-step guide to configure and launch the DISCOVER application.

System requirements

Lists the necessary hardware and software for the kit.

Development toolchains

Mentions IDEs compatible with the STM32F411 Discovery kit.

Order code

Provides the specific order code for the discovery kit.

Hardware layout

Embedded ST-LINKV2

Details the integrated ST-LINK/V2 for programming and debugging.

Power supply and power selection

Explains power sources and selection methods for the board.

LEDs

Describes the function and purpose of each LED on the board.

Pushbuttons

Explains the user and reset buttons and their functionalities.

On board audio capability

Covers the audio DAC, microphone, and audio output features.

USB OTG supported

Details the USB OTG functionality and its micro-AB connector.

E-compass MEMS

Describes the LSM303DLHC sensor for acceleration and magnetic fields.

Gyroscope MEMS

Explains the L3GD20 sensor for measuring angular rates.

JP2 (Idd)

Describes the JP2 jumper for measuring current consumption.

OSC clock

Covers the clock supply options for the microcontroller.

BOOT0 configuration

Explains how to configure the BOOT0 setting for boot behavior.

Solder bridges

Details the function and states of various solder bridges on the board.

Extension connectors

Describes the extension headers (P1, P2) for connectivity.

Mechanical drawing

Revision history

Document revision history

Lists the document's revision history with dates and changes.