17
Subject to technical modifications.
Laser type:
Technical data
Self-leveling range :
(horizontal)
Output:
Leveling accuracy:
Batteries:
Operating life:
Operating temperature range:
Storage temperature range:
Red diode laser, wavelength 635 nm
ca. ± 1°
horizontal: ± 0,2 mm/m / ± 1/4“ over 100ft
vertical: ± 0,3 mm/m / ± 23/64“ over 100ft
2 x 1,5 V Mono cells Alkaline, Size D, LR20
Approx. 80 hours
0°C to +50°C / or 32°F to +122°F
At temperatures > 50° C (122°F),
the unit begins to regulate automatically.
-20 °C to +60 °C / or -4°F to +140°F
• Dirty lens glass on the beam emitter detracts from the quality of the beam.
It should be cleaned with a soft cloth.
• Clean the laser unit with a damp cloth. Do not spray or immerse the unit!
Do not use solvents or thinners!
Care and maintenance
The LAPR-150 rotation laser must be handled carefully, in the same way as any
precision optical instrument.
Stabila provides a guarantee against deficiencies and faults in the assured characte-
ristics because of material or manufacturing faults for a period of 24 months from
date of purchase. Any faults will be eliminated at Stabila's own discretion either by
repairing or replacing the unit. Stabila accepts no wider claims.
No liability is accepted for any faults due to inappropriate treatment (e.g. damage
caused by the unit falling, operation with the wrong voltage or type of current, use of
unsuitable current supply sources) or for any autonomous changes made to the unit
by the purchaser or a third party.
Also no claims under guarantee are accepted for natural wear and tear or any small
faults that do not significantly affect the unit's operation.
Any guarantee claims must be made via the dealer on the duly completed guarantee
form (see last page) to be returned with the unit.
Guarantee terms and conditions
< 1 mW, Laser Class 2
to EN 60825-1:08-05
Protection against splashes and dust
IP 54
To Previous Page
Loading...
Need help?
General
