Stabila LAPR-150 User Manual

12
Marking out vertical areas
(vertical leveling)
Tilt the motor head 90° in its end position and engage the deflection optics in the
end position. Align the unit so that the vertical plane described by the optics is
parallel or at right angles to a line of reference. Switch the laser on via the sliding
switch 3). Align the casing by turning the unit on the base plate. Because of the
vibration that this may cause, the monitoring function may cause the laser beam to
flash.
Generating parallel planes:
Creating vertical reference areas, e.g.
measuring dividing walls.
Measuring tiles, panels, parquet (floors,
ceilings, walls), measuring right angles
simply by swiveling the unit.
At right angles to the wall:
2 basic methods of vertical leveling
Swiveling
until S1 = S2
Rotational
beam
Continuous
beam
Swiveling until S1 = S2
Rotational
beam
Continuous
beam
G
F
E

Stabila LAPR-150 Specifications

General

Brand	Stabila
Model	LAPR-150
Category	Laser Level
Language	English