40787-2205
2
12
ENTERING YOUR SECURITY CODE
the light
sound is turned on)
you can try your code again.
If an incorrect security code is entered
and
before the code can be tried again.
website at stackon.com under Customer Service.
To enter your own security code you will need to
follow the steps listed below:
DO NOT SHUT
YOUR NEW SECURITY CODE HAS BEEN
ENTERED CORRECTLY.
on the electronic touch pad. You will have
3 seconds to press the .... key otherwise you
will have to start over from step one. There will be
2 beeps (if the sound is turned on) and the green
new security code and press the .... key to
make sure the lock releases the knob so you can
INTERNAL LED LIGHT
This safe includes an internal LED light that will
entered and will remain on for 30 seconds.
lock the safe.
When you open the safe in the future enter the
security code you have set followed by the ....
key and turn the knob.
NOTE:
and security of the safe.
TURNING THE KEYPAD SOUND
OFF/ON
keypad by pressing the ... key.
.... key again.
To Next Page
Loading...
