STACYC 16EDRIVE - Throttle and Power Mode Operation; Understanding Power Modes and Battery Levels

P a g e | 14P a g e |
RED LED illuminated
(default)
Low-Speed/Power
YELLOW LED illuminated
Medium-Speed/Power
GREEN LED illuminated
Fast-Speed/Power
THROTTLE OPERATION:
(Conrm Speed Mode & Check Baery Level)
Operaon of throle is only for those supervised by an adult. In no circumstances
should a child be allowed to operate the cycle without proper training and super-
vision. If the child cannot walk, run, coast and brake, they are surely not ready for
throle control.
1. Ensure power switch is in “OFF” posion, throle in “zero” posion.
2. Install Baery.
3. Power on bike. (Power Switch to “ON” posion)
a. Audible Beep.
b. Followed by a light indicator.
c. Light indicates the power mode that is currently selected.
i. RED-Low Speed/Power *factory default
• (training mode)
ii. YELLOW-Medium Speed/Power
• (standard mode)
iii. GREEN-Fast Speed/Power
• (advanced mode)
4. While sing on the bike, both hands gripping the handlebar, both
feet at on the ground and ready to ride, turn the throle slightly, the
lights will show the baery level (twist slowly and a very lile amount,
careful to not acvate motor!)
a. Green, Yellow, Red lights→indicate full charge
b. Yellow, Red lights→indicate medium-low baery level
c. Red light→low baery level and baery needs to be changed.
◀
◀
◀