P a g e | 17
PROGRAMMING MODE ACTIVATION: only to be activated by an adult
POWER
SWITCH
THROTTLE
POSITION
NOTES:
LED
ILLUMINATION
OFF
ON
ON
ON
ON
ON
ON
ON
Hold at
FULL
Hold at
FULL
Hold at
FULL
Hold at
FULL +1sec
Release
to ZERO
Release
to ZERO
ZERO
Turn throle
-lights will light up as throle moves
from ZERO to FULL
NONE
YELLOW
ashing (5xs)
G,Y,R Flashing +
Beeping (5xs)
NONE
NONE
Select power level and hold
throle unl you hear 2 short
beeps
R, Y, G lights ash and 1 long
beep is heard
“SELECTED POWER MODE, LED
WILL ILLUMINATE”
IF ANY LIGHTS REMAIN ILLUMINATED WHEN THROTTLE IS
RETURNED TO ZERO, PROGRAM MODE IS NOT ACTIVATED
AND BIKE WILL MOVE WHEN TURNING THE THROTTLE.
EXERCISE CAUTION.
GREEN=ADVANCED/HIGH POWER
YELLOW=STANDARD/MEDIUM POWER
RED=TRAINING/LOW POWER
Cycle is turned OFF
To Next Page
Loading...
