Link two AS series speakers through TWS (True Wireless Stereo)
All AS speakers have a special feature that will take your listening
experience to the next level. It's called True Wireless Stereo (TWS), and it's
a unique Bluetooth™ feature that will let you enjoy true stereo without the
use of cables.
TWS works as follows:
• You pair a primary Bluetooth™ speaker to your preferred
Bluetooth™-enabled audio source. Let’s call it the Master.
• Take a second AS speaker. Let’s call it the Slave. Pair it with the
Master by following this procedure:
1.Press TWS button for 3 seconds on the master speaker
2. Press TWS button for 3 seconds on the slave speaker
3. The two speakers will link together and you will hear an audio
signal.
• Once the two speakers have been paired with each other, and you
have verified that the Master is paired with your main audio source,
you can start listening to your music. You’ll find that upon doing so,
TWS will instantly work its magic and give you a definitive stereo
sound experience -- with properly separated left and right channel
audio output -- despite the lack of a wired connection between your
two speakers.
Please note that only the audio generated by the media player will be
broadcasted thanks to TWS. This means that only the music coming from a
phone linked to the master via Bluetooth™ or the music played from a USB
stick on the master will be heard on the Slave speaker.
The microphones or auxiliary inputs will not be sent via TWS to another
speaker.
To Next Page
Loading...
