Stagg LightTheme ECOPAR 6 LT - DMX512 Connections; Fixture Cleaning

DMX512 CONNECTIONS
The DMX512 is widely used in intelligent lighting control, with a maximum of 512
channels.
Warning
To avoid signal transmission problems and interferences when using fixtures in chain, use
a Stagg N-series professional 3-pin DMX terminator (resistance: 120 ohms; pin2: DMX-;
pin3:DMX+).
FIXTURE CLEANING
An internal cleaning must be carried out periodically to optimize the light output. The
cleaning frequency depends on the environment in which the fixture operates: a damp,
smoky or particularly dirty surrounding can cause greater accumulation
of dirt on the fixtur e ’ s optics. Clean the fixture with a soft cloth and normal glass cleaning
fluid. Always dry the parts carefully. Clean the internal optics at least every
30 days. Clean the external optics at least every 20 days.