•
Do not
allow children unsupervised
to operate the fixture.
•
Do not touch any wire during
operation
as there might be a
hazard
of electric
shock.
•
Avoid
placing power wires next to other cables.
•
Disconnect
the
mains
power before
replacing
or
servicing
the fuses.
•
Replace
fuse only with the same type.
•
In the
event
of a
serious operating
problem, stop using the unit immediately.
•
Never
turn on and off the unit time after time.
•
The housing,
the
lenses,
or the
ultraviolet filter
must be
replaced
if they are visibly
damaged.
•
Do not open the unit as there is no user
serviceable
part inside.
•
Never
try to
repair
the unit by
yourself. Repairs carried
out by
unskilled
people can
lead to damage or
malfunction. Please
contact the
nearest authorized
technical
assistance
centre.
•
Disconnect
the
mains
power if the
fixture
is not used for a long time.
•
Use the
original packaging
to transport
regarding
any
warranty
issue.
•
Do not look
directly
at the
LED
light beam
while
the
fixture
is on.
•
Do not connect more than 7 units to the same power source.
INS
T
ALLA
TION
The
unit should be mounted
via
its screw
holes
on the bracket.
Always ensure
that
the unit is
firmly
fixed to avoid
vibration
and
slipping while operating. Always
ensure
that the structure to which you are
attaching
the unit is
secure
and able to support
10 times the unit’s weight. Also,
always
use a
safety
cable that can hold 12 times
the unit’s weight when
installing
the fixture.
The equipment must be fixed in an appropriate place by professionals. Keep it
out of the reach of unqualified people.
To Next Page
Loading...
