EasyManua.ls Logo

Stagg MPAS 80/10 - For Your Safety

Stagg MPAS 80/10
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
User’s manUal
mPas 80/10 & mPas 80/12
ELECTRICAL CONNECTIONS AND SUPPLY
Thank you for purchasing this product.
The MPAS 80/10 or the MPAS 80/12 powered speaker with integral mixer section has been designed as
a multi purpose toolThe internal power amplier is rated at 65 Watts RMS @ 4 Ohms through a power-
ful 10” or 12”/ 8 Ohms speaker, making it ideal as a stand alone micro PA system The MPAS 80/10 or
MPAS 80/12 can also be utilised within a larger system, wherever sound is required
Enjoy the versatility 
FOR YOUR SAFETY
MPAS 80/10 or MPAS 80/12
This speaker is mains (AC) powered and must be connected to a mains (AC) outlet to enable it to
operate Please ensure correct voltage and plug type are used before the unit is powered-up
This unit must never be used in humid conditions It should not be exposed
to dripping, splashing or proximity to objects lled with liquids
This Amplied Speaker system must be earthed
If the mains cable and/or plug become damaged, replace them immediately
Please, destroy the damaged cable and/or plug to avoid any possible future
accidents and to protect the safety of yourself and others.
Never attempt to open the cabinet yourself
Refer any servicing or repairs of this unit to a qualied electrican
Always use same type of fuse (T1A) when replacement is required
IMPORTANT ! disconnect from mains when replacing fuse The fuse cover must be in place before
reconnecting to the mains.
CAUTION
Exposure to extremely high volume levels could cause permanent hearing damage or loss Keep volume
at a reasonable level
MARKING & C0NFORMITY
1. The CE mark on this product means it conforms to the EMC Directive (89/69/EEC), CE marking Directive
(93/68/EEC) and Low Voltage Directive (72/23/EEC)
2. The «Crossed-out Wheeled Bin» is to drawn your attention on the WEEE (Waste Electric & Electronic
Equipment) Directive (2002/96/EC) It means this apparatus must be collected separately for recycling
3«RoHS compliant» means this device conforms to the Directive (2002/95EC) on the restriction of the
use of certain hazardous substances in electrical and electronic equipments, such as: Mercury, Lead,
Cadmium, Hexavalent Chromium, Polybrominated Buphenyl (PBB) and Polybrominated Diphenyl Esthers
(PBDE)
RoHS
compliant

Related product manuals