Stagg RIOTBOX 8 - Safety Instructions

This is a user manual for the Powered Speaker. It contains important safety information as well as
the instructions required for the intended use of the device. Please read it carefully before use.
Please note that the design and the technical specications of the device are subject to change
without any prior notice. Check the website for updates.
SAFETY INSTRUCTIONS
• Thank you for purchasing this product. It has been thoroughly tested and has been shipped in
perfect operating condition.
• Before using the product, carefully check the packaging for damage. If the packaging is
damaged, carefully inspect the device and the power supply and make sure they are intact. If
they are damaged, please contact your vendor or call our customer support number. The whole
power supply should be replaced if it is damaged or if the plug is damaged. Do not open the
cabinet or power supply. Leave all servicing to qualied personnel.
• This amplier can either be powered by its external SMPS power supply , it can also work
autonomously using its build in Li-ion battery as soon as it is sufciently charged.
• The SMPS power supply (switched mode power supply) works between 100V AC and 240V AC.
Make sure the mains plug corresponds to your local need. When the amplier is powered from
mains the internal battery will be charged automatically.
• Only use the device in a dry location. Do not operate the device if the ambient temperature or
humidity is too high.
• Do not spill or splash liquids on the amplier. Should this happen, unplug the power cable from
the mains outlet and switch off the powered speaker immediately.