EasyManua.ls Logo

Stagg STP-710 - Using the Foot Pedals; Using the MIDI IN;OUT Ports

Stagg STP-710
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The Connectors..................Continued
Using the Foot Pedals
Using the MIDI IN/OUT Ports
9
Connect the DIN plug of the footboard
to the “PEDAL” DIN socket on the rear
panel
. You will experience the sustain
effect
.
MIDI stands for Musical Instrument
Digital Interface. MIDI is a world wide
standard that allows various electronic
musical instruments and other devices
to communicate with each other.
MIDI IN: Data transmitted from other MIDI instruments via MIDI are received at this connector.
MIDI OUT: Data produced by the Digital Piano are transmitted to other MIDI instruments via
MIDI from this connector.