EN
- 29 -
3. TECHNICAL DATA
Unit’s equipment (page 2):
1 - Handle, 2 - Hood, 3 - Basket guide, 4 - Control panel, 5 - Body, 6 - Adjustable feet, 7 - Power supply,
8 - Water supply, 9 - Drain hose
Model 803021 803035, 803036, 803037
Dimensions (WxDxH)
728x816x1505 mm
Supply voltage
400V/3+N+PE
Frequency
50 Hz
Maximum power consumption
10,8 kW
Water supply pressure
2-4 Bar
Water supply temperature
max. 55
o
C
Water hardness in the water supply system
5-6 °dH
Water consumption
2,5 l/cycle
Boiler capacity
9,5 l
Maximum water level in the chamber
175 mm
Tank capacity
20 l
Standard cycle duration*
120/180 s 90/120/180 s
Noise level
65 dB(A)
Protection
IPX3
Net weight
94 kg 96,5 kg
Type of power cable
H07RN-F 5x2,5mm
2
Washing water temperature
55°C (131°F) 60-65°C (140-149°F)
Rinse temperature
30-90°C (86-194°F) 82-90°C (181-194°F)
The dishwasher has an automatic steam function (integral part of the washing cycle).
* The duration of the cycle is given for the supply water temperature of 50
°C.
4. INSTALLATION
4.1. Setting the appliance
The appliance must be delivered to the installation site, unpacked, and its condition should be checked. In
case of damage to the appliance or any of its components, the shipping company must be notied imme-
diately.
Connections to the devices must conform to the standards in force at the installation site. The manufacturer
is not liable for any injury or damage to the product resulting from failure to comply with the standards in
force at the installation site. Before installing the appliance, make sure that the moisture-sensitive compo-
nents are properly protected against wetting, e.g.: during the washing of the appliance.
The appliance should be set at a desired location and then the protective packaging should be removed.
The appliance should be leveled using a spirit level and the four adjustable feet, thus ensuring stable opera-
tion. Any other way of leveling the appliance should be approved by the manufacturer.
The packaging materials should be kept away from children and pets, as they can cause an accident. All
materials used to pack the product are environmentally friendly and can be safely stored in a suitable place.
Recyclable components are marked as follows:
• PE – polyethylene: external packaging components, manual jacket, fastening components;
• PP – polypropylene: grips;
• Wooden and cardboard components must be left in places intended for this purpose in accordance
with applicable law.
It is forbidden to store the appliance and its components directly in the environment.
To Next Page
Loading...
