Stalgast 803021 - Recommended Settings

EN
- 35 -
The arrows can be used to adjust the temperature on display 2.
SERVICE SETTINGS (it is recommended that they are not changed)
Press
SET
again. The displays will show the following data: - minimal sanitization
temperature (50-90
o
C).
The
arrows can be used to adjust the temperature on display 2.
Press
SET
again. The displays will show the following data: time for water release
after the activation of the pressure switch (0-40 sec.) determining the water level.
The
arrows can be used to adjust the time of water release on display 2.
Press
SET
again. The displays will show the following data : - sanitization time
(8-15 sec.).
The
arrows can be used to adjust the sanitization time on display 2.
During the setting of the above parameters the display screen is blinking, and the values of the parameters
can be changed using the arrows.
RECOMMENDED SETTINGS
Function Name
Function description Recommended
value
P1
sanitization (rinsing) temperature
90
ºC
P2
washing temperature
60
ºC
P3
minimal sanitization temperature
82
ºC
P4
time for water release after the activation of the pressure switch 0 seconds
P5
sanitization (rinsing) time 15 seconds
b. programming of cycle duration
Press
Display 1 will indicate:
– the set time is 90 seconds
– the set time is 120 seconds;
– the set time is 180 seconds;
The program is exited automatically 5 seconds after the selection of the desired cycle duration