Stamina 1310 - Operating Your Exercise Bike; Adjusting Seat Height; Adjusting Resistance Level

OPERATIONAL INSTRUCTIONS
12
SEAT HEIGHT ADJUSTMENT
Proper seat height is important for e󰀩cient exercise. To determine proper seat height, sit on the BIKE and
center the ball of your foot on the pedal in the down position. Your leg should be slightly bent and relaxed
as shown.
If your leg is too straight or if your foot cannot touch the pedal when extended at the downstroke, you will
need to lower the seat. If your leg is bent too much, you will need to raise the seat. Loosen and pull the
ADJUSTMENT KNOB(26), then lower or raise the SEAT(32) to the desired height, and secure with the
ADJUSTMENT KNOB(26). Make all adjustments to seat height while o󰀨 of the bike.
NOTE: The pin of the ADJUSTMENT KNOB(26) must be inserted into one of the adjustment holes in the
SEAT POST(4) and the ADJUSTMENT KNOB(26) must be screwed in tight to ensure that the
SEAT POST(4) will t securely in the MAIN FRAME(1).
LOAD ADJUSTMENT
To increase the load, turn the TENSION KNOB(28) clockwise. To
decrease the load, turn the TENSION KNOB(28) counterclockwise.
There are eight levels for the load adjustment.
NOTE: The load will increase as you pedal faster.