Stamina 1310 - Assembly Instructions: Stabilizers; Attaching the Front Stabilizer; Attaching the Rear Stabilizer

ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520 (in
the U.S.). Our Customer Care Sta󰀨 is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the FRONT STABILIZER(2) to the front of the MAIN FRAME(1) with CARRIAGE BOLTS
(M8x1.25x65mm)(46), ARC WASHERS(M8)(52), and ACORN NUTS(M8x1.25)(56).
STEP 2
Remove the Steel Inserter from the MAIN FRAME(1). Insert the REAR STABILIZER(3) into the MAIN
FRAME(1) and secure with BUTTON HEAD BOLTS(M8x1.25x15mm)(47), ARC WASHERS(M8)(52), and
WASHERS(M8)(54).
NOTE:
2
3
46
47
47
47
52
52
52
52
54
56
56
1
31
31
Steel Inserter
(Remove before the
assembly.)
1. The Steel Inserter is only for packing, do not dispose of the packing materials until assembly
is completed.
2. You can adjust the LEVELING CAPS(31) on the REAR STABILIZER(3) to keep the Bike stable.