Stamina 1399 - Page 18

PART# PART NAME QTY
PARTS LIST
18
56 Stopper Bumper 2
57 Bolt, Flat Head (M8 x 1.25 x 15mm) 2
58 Oval Endcap (30mm x 60mm) 2
59 Bolt, Hex Head (M8 x 1.25 x 15mm) 1
60 Roller Spacer (ø10.2 x ø16 x 5.5mm) 6
61 Roller 6
62 Spacer Tube (ø10.2 x ø12 x 66mm) 3
63 Nylock Nut (M10 x 1.5 x 7mm Thick) 3
64 Bolt, Button Head (M10 x 1.5 x 105mm) 3
65 Bolt, Round Head (M6 x 1 x 15mm) 4
66 Seat 1
67 Meter 1
68 Sensor Wire 1
69 Screw, Round Head (M5 x 8mm) 1
70 Magnet 1
71 Carriage Bolt (M8 x 1.25 x 65mm) 2
72 Nut (3/8"-26 x 7mm thick) 5
73 Rubber Stand 2
74 Washer (M6) 2
75 Screw, Round Head (M5 x 20mm) 2
76 Foam Pad (25 x 25 x 5mm thick) 2
77 Nylon Washer (ø17.5 x ø25 x 1 mm thick) 2
78 Washer (ø17.2 x ø21 x 1 mm thick) 4
79 Nylon Washer (ø10.2 x ø16.5 x 1 mm thick) 2
80 Support Plate 1
81 C Ring (17mm) 1
82 Nylon Washer (ø10.2 x ø16 x 0.5 mm thick) 1
83 Protection Cap 2
84 Right Cover 1
85 Sensor Clip 1
86 Flange Nut (3/8"-26) 2
87 Eyelet Bolt (M6 x 1 x 35mm) 2
88 Tension Bracket 2
89 Nut (M6 x 1) 2
90 Screw, Round Head (M3 x 12mm) 2
91 Spring Box Cover 1
92 Thin Nut (3/8"-26, 0.16" thick) 2
93 Spring Holder 1
94 Spring Core 1
95 Set screw (M4 x 0.7 x 6mm) 1
96 Spring 1
97 Pulley Axle 1
98 Spring Box 1
99 Belt Pulley 1
100 C Ring (9mm) 1
101 Washer (ø10.2 x ø13 x 0.5 mm thick) 1
102 Screw, Flat Head (M5 x 0.8 x 12mm) 2
103 Rubbing Disc 1
104 Washer (ø5 x ø11 x 1 mm thick) 2
105 Warning Label 1
106 Wrench 1
107 Allen Wrench (5mm) 1
108 Allen Wrench (6mm) w/ Screwdriver 2
109 Manual 1