What to do if Standard Horizon Transceiver charge indicator does not appear when charging?
If the charge indicator doesn't appear when charging your Standard Horizon Transceiver, first ensure the transceiver is properly set onto the SBH-32 Charger Cradle. Also, verify that power is supplied to the SBH-32 Charger Cradle by connecting SAD-25 or E-DC-19A for AC/DC power.
What to do if charge indicator does not appear on Standard Horizon Transceiver?
If the charge indicator doesn't appear when charging your Standard Horizon Transceiver, there are a few potential reasons: 1. The transceiver might not be correctly placed on the SBH-32 Charger Cradle. Ensure it's properly set. 2. The SBH-32 Charger Cradle may not be receiving power. Connect the SAD-25 or E-DC-19A to the SBH-32 Charger Cradle to supply AC/DC power. 3. The battery SBR-13LI may be defective.
What to do if the Standard Horizon Transceiver charge indicator does not appear when charging?
If the charge indicator doesn't appear when charging your Standard Horizon Transceiver, there might be a few reasons. First, ensure the transceiver is correctly placed on the SBH-32 Charger Cradle. Second, check that the SBH-32 Charger Cradle is receiving power by connecting the SAD-25 or E-DC-19A for AC/DC power. If the issue persists, the battery (SBR-13LI) may be defective, in which case you should contact a Standard Horizon dealer.
What to do if Standard Horizon HX890 Transceiver cannot fix the GPS satellites?
If your Standard Horizon Transceiver cannot fix the GPS satellites, it might be due to the internal GPS receiver being turned off. Ensure the internal GPS receiver is turned on. Another possible cause is a poor location for GPS satellite reception. Try moving to a less obstructed position to improve reception.
Why Standard Horizon HX890 Transceiver cannot output sound by pressing and holding the [SQL] key?
If your Standard Horizon Transceiver cannot output sound when pressing and holding the [SQL] key, it could be due to a low battery. Try charging the battery. Alternatively, the audio volume level might be too low. Press the [VOL+] key until background noise outputs.
How to fix USA/INTL/CAN modes on Standard Horizon Transceiver?
Specify the item number from “SETUP MENU” – “CH SETUP” – “CH GROUP” to fix the USA/INTL/CAN modes on your Standard Horizon Transceiver.
What to do if Standard Horizon Transceiver cannot acquire GPS satellites?
If your Standard Horizon Transceiver is unable to acquire GPS satellites, it might be because: * The internal GPS receiver is off. Turn the internal GPS receiver on. * The current location is not suitable for GPS satellite reception. Move to a less obstructed position.
Why Standard Horizon HX890 Transceiver cannot fix the GPS satellites?
If your Standard Horizon Transceiver cannot fix GPS satellites, ensure that the internal GPS receiver is turned on. Also, move to a location with a clearer view of the sky, as the current position might have poor GPS satellite reception due to obstructions.
What to do if Standard Horizon Transceiver cannot output sound by pressing and holding the [SQL] key?
If your Standard Horizon Transceiver doesn't output sound when pressing and holding the [SQL] key, it could be due to a low battery. In this case, charge the battery. Alternatively, the audio volume level might be too low. Try pressing the [VOL+] key until background noise is audible.
Why Standard Horizon Transceiver cannot transmit a DSC Call?
If your Standard Horizon Transceiver cannot transmit a DSC call, it is possible that the MMSI number has not been programmed. Program the MMSI number.
General| Waterproof Rating | IPX8 |
|---|---|
| GPS | Yes |
| Floating | Yes |
| Bluetooth | Yes |
| DSC Capability | Yes |
| Emergency Button | Yes |
| Type | Handheld |
| Power Output | 6W |
| Battery | Lithium-ion |
| Display | 1.7" x 1.7" |
| Channels | USA/International/Canada |
| Battery Life | 11 hours (approx.) |
To Next Page
