EasyManua.ls Logo

Standby L54 User Manual

Standby L54
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
L54 – Manual
WAM454A 1 Standby AB – standbygroup.se
L54
Thank you for choosing a product from Standby.
Technical Data
Lens Polycarbonate
Housing Aluminium (black)
Color Blue, Amber, Red White
Diodes 6 high power LED
Cable Single: 0.84 m (160 mm + 680 mm) + 2 m driver cable
Double : 2x 0.84 m (160 mm + 680 mm) + 2 m driver cable
Power 10-30 V DC
Ambient temperature -40ºC to +85ºC
Power consumption 0.8 A peak at 13.8 V
0.4 A peak at 27.6 V
Size Lamp: 85 x 36 x 15 mm
Driver (single): 80 x 14.3 x 18.6 mm
Driver (double): 80 x 14 x 27 mm
Approvals Light: ECE R65 (E5)
EMC: ECE R10 (E5)
Included Single:
1 x L54 Lamp
1 x driver D13s
Double:
2 x L54 Lamp
1 x driver D13d
Synchronizing Up to 10 units (lamps and driver)
Factory Settings
Flash pattern Sync mode
Double Simultaneous
To change the flash pattern setting, see Flash Pattern. To change the sync mode setting, see Sync Mode.

Other manuals for Standby L54

Question and Answer IconNeed help?

Do you have a question about the Standby L54 and is the answer not in the manual?

Standby L54 Specifications

General IconGeneral
BrandStandby
ModelL54
CategoryWork Light
LanguageEnglish

Summary

Product Technical Specifications L54

L54 Lamp Factory Settings and Configuration

L54 Flash Pattern Configuration Guide

Configure the lamp's flashing sequence. Supports built-in or external control for patterns like Double and Triple.

L54 Synchronization Mode Setup

Synchronize multiple lamps. Choose between Simultaneous (same time) or Alternate (out of sync) flashing modes.

Reset L54 Lamp to Factory Defaults

L54 Wiring and Connection Diagrams

L54 Lamp Installation and Mounting Precautions

L54 Reversing Lamp Specific Mounting Angle