Stanley 76001 - Nose Extension Kits

14
ENGLISH
6. NOSE EXTENSION KITS
Nose Extension Kits are supplied separately for  tting to abase tool. Attached between the tool and the nose
assembly the extension allows access into deep channels.
PREPARING THE BASE TOOL TO ACCEPT EXTENSION KIT.
IMPORTANT - READ THE SAFETY WARNINGS LISTED IN THE PROSET XT1 AND PROSET XT2 INSTRUCTION
MANUAL CAREFULLY BEFORE PUTTING INTO SERVICE.
IMPORTANT - THE AIR SUPPLY MUST BE TURNED OFF OR DISCONNECTED BEFORE FITTING OR
REMOVING THE SWIVEL HEAD NOSE ASSEMBLIES.
Refer to  g. 13.
Fig. 13
• The air supply must be disconnected.
• Unscrew Nose Housing (TP144-048), including the Nose Piece (PRN614), Nose Housing Nut (TRM00239),
and ORing (DPN900-002).
• 5HPRYH-DZ3XVKHU73WRJHWKHUZLWK8UHWKDQH:DVKHU73-DZ3XVKHU
6SULQJ73IURP3XOOLQJ+HDG750
• 5HPRYH0DQGUHO*XLGH73IURP3XOOLQJ+HDG750