Stanley BR87 User Manual

6 ► BR87 User Manual
and understand the materials you are cutting.
Follow correct safety procedures and comply with
all applicable national, state or provisional health
and safety regulations relating to them, including,
if appropriate arranging for the safe disposal of the
materials by a qualied person.
• Check fastener tightness often and before each use
daily.
• Never operate the tool if you cannot be sure that
underground utilities are not present, such as
electrical cables, gas pipes, etc. These can cause a
hazard if damaged with the tool.
• The tool is not insulated against coming into contact
with electric power.
• Do not wear loose tting clothing when operating the
tool.
• Warning: Hydraulic uid under pressure could cause
skin injection injury. If you are injured by hydraulic
uid, get medical attention immediately.
• Keep all body parts away from the working tool.
• When handling material or the tool bit, wear your
Personal Protection Equipment (PPE).
• Be observant of the hydraulic hoses lying about the
work area as they can be a tripping hazard.
• Always de-energize the hydraulic system when
changing a tool bit.
• Take caution when changing a tool bit. Tool bits can
get very hot.
• Never use the tool in an explosive atmosphere.
Sparks from the breaking process could ignite
explosive gas.
• Use proper lifting techniques when handling the tool.
Get help from a co-worker and do not over-reach.
• Use proper protection from falling or ying debris.
Keep bystanders at a safe distance.
• Do not exceed the rated ow and pressure. See
“SPECIFICATIONS” on page 17 for correct ow
rate and pressure rating. Rapid failure of the internal
seals may result.
• Do not exceed the maximum relief valve setting
stated on the tool.
SAFETY PRECAUTIONS

Stanley BR87 Specifications

General

Brand	Stanley
Model	BR87
Category	Power Tool
Language	English