G
B
21
1. PRECAUTIONS
An ACOUSTIC PRESSURE value of 4 m. corresponds
to the ACOUSTIC POWER value stated on the yellow
label located on the compressor, minus 20 dB.
THINGS TO DO
● The compressor must be used in a suitable
environment (well ventilated with an ambient
temperature of between +5°C and +40°C) and
never in places affected by dust, acids, vapors,
explosive or flammable gases
● Always maintain a safety distance of at least 4
● Any coloring of the belt guards of the compressor
during painting operations indicates that the distance
● Insert the plug of the electric cable in a socket of
suitable shape, voltage and frequency complying
●
the direction of rotation is correct and matches that
Fig. 10,
the air must be conveyed towards the head of the
● Use extension cables with a maximum length of 5
●
also of adapters and multiple sockets should be
● Always use the switch of the pressure switch to
●
● When operating, the compressor must be placed
on a stable, horizontal surface to guarantee correct
THINGS NOT TO DO
● Never direct the jet of air towards persons, animals
your eyes against flying objects that may be lifted by
● Never direct the jet of liquids sprayed by tools
connected to the compressor towards the
● Never use the appliance with bare feet or wet hands
● Never pull the power cable to disconnect the plug
● Never leave the appliance exposed to adverse
● Never transport the compressor with the receiver
●
●
Keep children and animals at a distance from the
●
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by
● Children should be supervised to ensure that they do
● Do not position flammable or nylon/fabric objects
● Never clean the compressor with flammable liquids
●
●
cannot not be used for pharmaceutical, food or medical
purposes except after particular treatments and cannot
THINGS YOU SHOULD KNOW
● To avoid overheating of the electric motor,
this compressor is designed for intermittent
operation as indicated on the technical dataplate
thermal cutout of the motor trips, automatically
cutting off the power when the temperature is too
● To facilitate restart of the compressor, in addition
to the operations indicated, it is important to
return the button of the pressure switch to the
Preserve this handbook for future reference
To Next Page
Loading...
Need help?
General
