Stanley Fatmax FMC010 - Drill Safety and Battery Management; Drill Operation Safety Warnings; Battery Pack Installation and Removal

8
ENGLISH
(Original instructions)
PB
ENGLISH
(Original instructions)
z
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Batteries
Z
Run the battery down completely, then remove it
from the tool.
u NiCd, NiMH and Li-Ion batteries are recyclable. Take them
to any authorised repair agent or a local recycling station.
Technical data
FMC010 (H1)
Voltage V
DC
10.8
No-load speed Min
-1
0-315, 0-1200
Max. torque
(PTI Rating)
Nm 27
Chuck capacity mm 10
Max Drilling capacity
Steel/wood mm 10/25
Weight kg 1.1
Charger FMC090L typ. 1
Input Voltage
V
AC
220-240
Output Voltage V
DC
10.8
Current A 2
Approx. charge time min
30
Battery
FMC085L
Voltage
V
DC
10.8
Capacity Ah 1.5
Type Li-Ion
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 62.5 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 73.5 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Drilling into metal (a
h, D
) < 2.5 m/s
2
, uncertainty (K) 1.5 m/s
2
Screwdriving without impact (a
h, s
) < 2.5 m/s
2
, uncertainty (K) 1.5 m/s
2
Australia & New Zealand
Stanley Black & Decker
82 Taryn Drive, Epping, VIC 3076 Australia
Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ)
90610805 05/14