15
ENGLISH
(Original instructions)
Stanley Europe provides a facility for the collection and
recycling of Stanley Fat Max products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Stanley Europe ofce at
the address indicated in this manual. Alternatively, a list of
authorised Stanley Europe repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
FME720
(Type 1)
Voltage V
ac
230
Power input
W 2000
No-load speed min
-1
4,800
Blade diameter mm
255
Blade bore
mm 30
Blade body thickness mm 1.8
max cross-cut capacity 90° mm 305
max mitre capacity 45°
mm 203
max depth of cut 90°
mm 92
max depth of bevel
cross-cut
mm 41
Mitre (max positions)
left 47°
right 47°
Bevel (max positions)
left 47°
right 0°
Weight
kg 22
Cutting capacities
Max cross cut x depth of cut 92 mm x 305 mm
Max bevel 47° 41 mm x 305 mm
Max mitre 47° 92 mm x 203 mm
Max capacity at 47° x 47° compound 41 mm x 203 mm
L
pA
(sound pressure) 95 dB(A), Uncertainty (K) 3 dB(A)
L
WA
(sound power) 108 dB(A), Uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 61029:
Vibration emission value (a
h
) 2.78 m/s
2
, uncertainty (K) 1.5 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
%
FME720
Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-9
These products also comply with Directive 2004/108/EC and
2011/65/EU. For more information, please contact Stanley
Europe at the following address or refer to the back of the
manual.
The undersigned is responsible for compilation of the technical
le and makes this declaration on behalf of Stanley Europe.
_
Kevin Hewitt
Vice-President Global Engineering
Stanley Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
07/02/2014
To Next Page
Loading...
