4
5
GB GB
User Manual
Warning:
Warning:
Warning:
METAL SCAN / AC TRACKING Mode
11
METAL SCAN Mode
AC TRACKING Mode
12
13
live wire on the screen as shown below.
Cautions on Operating
OPERATING TIPS
The Stud Sensor 300 is designed for use only on interior surfaces.
Prevent Interference
and wall surface while testing or scanning surfaces.
Conventional Construction
Surface Differences
The Stud Sensor 300 will scan through common building materials, Including:
•
• Plywood sheathing
•
•
•
The sensor cannot scan through:
•
• Foil faced materials
• Ceramic tile
• Cement or concrete
•
Wallpaper
Ceilings
away from the unit.
Note:
IMPORTANT SAFETY NOTICE
SPECIFICATIONS
(At 35-55% relative humidity)
Battery (not included)
Depth Range
Wood Studs ") through drywall
Metal Studs ") through drywall
Live AC Wires
") through drywall
METAL SCAN Mode ") through drywall
Operating Temperature
Storage Temperature
1-YEAR LIMITED WARRANTY
www.stanleytools.com for details.
To Next Page
Loading...
Need help?
General
