12
ENGLISH
(Original instructions)
Problem Possible Cause Possible Solution
Tool operates,
but does
not drive the
fastener fully.
Low battery charge or
damaged battery.
Depth adjustment set
too shallow.
Tool not rmly applied
to workpiece.
Material and fastener
length too rigorous
an application.
Charge or replace battery.
Rotate depth adjustment
wheel to
a deeper setting.
Read instruction manual.
Choose appropriate material
or fastener length.
Maintenance
Your STANLEY FATMAX corded/cordless appliance/tool
has been designed to operate over a long period of time
with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool/appliance care and
regular cleaning.
Warning! Switch off and unplug the appliance before carrying
out any cleaning.
u Dirt and grease may be removed from the exterior of the
appliance using a cloth.
Warning! NEVER use solvents or other harsh chemicals
for cleaning the non-metallic parts of the appliance. These
chemicals may weaken the materials used in these parts. Use
a cloth dampened only with water and mild soap. Never let
any liquid get inside the unit; never immerse any part of the
unit into a liquid.
Warning! NEVER spray or in any other way apply lubricants
or cleaning solvents inside the tool. This can seriously affect
the life and performance of the tool.
Service Notes
This product is not user serviceable. There are no user
serviceable parts inside the nailer. Servicing at an authorized
service center is required to avoid damage to static sensitive
internal components.
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
SFMCN616 Type:H1
Voltage
V
DC
18
Barttery Type Li-Ion
Actuating mode Sequential
Magazine angle Straight
No load speed /min 9100
Drive energy approx 60J
Weight (bare tool) kg 2.6
Fasteners
Length mm 25 - 64
Shank diameter mm 1.6
Angle Straight
Charger SFMCB11 SFMCB12 SFMCB14
Input Voltage
V
AC
230 230 230
Output Voltage
V
DC
18 18 18
Current A 1.25 2 4
Battery SFMCB201 SFMCB202 SFMCB204 SFMCB206
Voltage
V
DC
18 18 18 18
Capacity Ah 1.5 2.0 4.0 6.0
Type Li-Ion Li-Ion Li-Ion Li-Ion
Level of sound pressure according to EN60745:
Sound pressure (L
pA
) 84 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 95 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN60745:
Staple nails (a
h
) 2.8 m/s
2
, uncertainty (K) 1.8 m/s
2
To Next Page
Loading...
Need help?
General