Stanley FATMAX SFMCPH845 - Product Information, Intended Use & Assembly; Package Contents & Intended Use; Assembly & Battery Installation;Removal

11
ENGLISH
Package Contents
The package contains:
1 Hedge Trimmer
1 Sheath
1 Battery
1 Charger
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Wear headprotection.
Wear slip-resistantfootwear.
Beware of fallingobjects.
Do not expose the tool to rain or high
humidity or leave outdoors while it israining.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery
from thetool.
Keep bystandersaway.
Keep hands away fromblade.
Electrocution hazard. Keep at least 10 m away
from overheadlines.
92
Directive 2000/14/EC guaranteed
soundpower.
Date Code Position (Fig. Q)
The date code
29
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Trigger switch
2
Lock button
3
Battery
4
Foam gripper
5
Threaded pole
6
Threaded sleeve
7
Locking latch
8
Hand guard
9
Five position head
10
Trimmer blade
11
Handle module
12
Trimmer head module
Intended Use
Your STANLEYFATMAX, SFMCPH845 hedge trimmer has been
designed for professional landscapingapplications.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
This pole hedge trimmer is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can causeinjury.

WARNING: Use only STANLEYFATMAX battery packs
andchargers.
Inserting and Removing the Battery Pack
from the Tool (Fig. B, C)
NOTE: Make sure your battery pack
9
is fullycharged.
To Install the Battery Pack into the Tool
Handle
1. Align the battery pack
9
with the rails inside the tool’s
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap intoplace.