Stanley FATMAX SFMCPH845 - HEDGE TRIMMER SFMCPH845; Technical Data; EC-Declaration of Conformity

ENGLISH
3
Battery
Cat #
Output
Voltage
Charger
SFMCB12
SFMCB202 18 X
SFMCB204 18 X
SFMCB206 18 X
“X” Indicates that the battery pack is compatible with that
specific charger. Read the instruction manual for more
specificinformation.
EC-Declaration of Conformity
Machinery Directive
Hedge Trimmer
SFMCPH845
STANLEYFATMAX declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN ISO 10517:2019.
2000/14/EC, Annex V
DEKRA Certification B.V.
Meander 1051 / P.O. box 5185
6525 MJ ARNHEM / 6802 ED
ARNHEM, Netherlands
L
PA
(measured sound pressure) 75.5 dB(A)
uncertainty (K) = 2.5 dB (A)
L
WA
(guaranteed sound power) 92 dB(A)
These products also comply with Directive 2014/30/EU
and 2011/65/EU. For more information, please contact
STANLEYFATMAX at the following address or refer to the back
of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofSTANLEYFATMAX.
A. P. Smith
Technical Director
STANLEYFATMAX Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
28.10.2019
WARNING: To reduce the risk of injury, read the
instruction manual.
Congratulations!
You have chosen a STANLEYFATMAX tool. Years of experience,
thorough product development and innovation make
STANLEYFATMAX one of the most reliable partners for
professional power toolusers.
Technical Data
Batteries & Chargers sold separately
SFMCPH845
Voltage V
DC
18
UK & Ireland V
DC
18
Type 1
Blade length mm 450
Blade gap mm 19
Blade strokes spm 1400 min
-1
Cutting Swath Size mm 457
Weight (without battery pack) kg 3.6
Noise values and vibration values (triax vector sum) according to
EN62841-2-15:
L
PA
(emission sound pressure level) dB(A) 75.5
L
WA
(sound power level) dB(A) 90.0
K (uncertainty for the given sound
level)
dB(A) 2.2
Vibration emission value a
h
=
m/s
2
<2.5
Uncertainty K =
m/s
2
1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of
workpatterns.
English (original instructions)
HEDGE TRIMMER
SFMCPH845