Stanley FATMAX V20 SFMCN618 - Service Notes; Non-Serviceable Parts; Protecting the Environment; Battery and Product Disposal

14
ENGLISH
(Original instructions)
Service Notes
This product is not user serviceable. There are no user
serviceable parts inside the nailer. Servicing at an authorized
service center is required to avoid damage to static sensitive
internal components.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
SFMCN618 Type:1
Voltage V
DC
18
Battery Type
Li-Ion
Actuating mode
Sequential
Magazine angle Straight
No load speed /min
9000
Drive energy approx
50J
Weight (bare tool) kg
2.43
Fasteners
Length mm
16 - 50
Shank diameter mm
1.27
Angle
Straight
This tool is a Bare unit but can be used with the chargers in
the following table.
Charger SFMCB11 SFMCB12 SFMCB14
Input Voltage
V
AC
230 230 230
Output Voltage
V
DC
18 18 18
Current A 1.25 2 4
This tool is a Bare unit but can be used with the batteries in
the following table.
Battery
SFMCB201 SFMCB202 SFMCB204 SFMCB206
Voltage V
DC
18 18 18 18
Capacity Ah
1.5 2.0 4.0 6.0
Type
Li-Ion Li-Ion Li-Ion Li-Ion
Level of sound pressure according to EN60745:
Sound pressure (L
pA
) 84 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 95 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN60745:
Staple nails (a
h
) 2.8 m/s
2
, uncertainty (K) 1.8 m/s
2
Declaration of Conformity
The Supply of Machinery (Safety) Regulations 2008
SFMCN618 - Cordless Nailer
STANLEY FATMAX declares that these products described
under “technical data” are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN 60745-1:2009 + A11:2010; EN
60745-2-16:2010.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact STANLEY FATMAX at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal le and makes this declaration on behalf of STANLEY
FATMAX.
Karl Evans
Director – Consumer Power Tools
STANLEY FATMAX, 270 Bath Road, Slough,
Berkshire, SL1 4DX
United Kingdom
06/08/2019
EC declaration of conformity
MACHINERY DIRECTIVE
%
SFMCN618 - Cordless Nailer
STANLEY FATMAX declares that these products described
under 2006/42/EC; EN 60745-1:2009 + A11:2010; EN 60745-
2-16:2010.