Stanley ProSet XT2 - Safety Rules; Intent of Use

3
ENGLISH
• Never leave operating tool unattended. Disconnect air hose when tool is not in use.
• Adequate clearance is required for the tool operator’shands before proceeding.
• DO NOT abuse the tool by dropping or using it as ahammer.
STANLEY Engineered Fastening policy is one of continuous product development and improvement
and we reserve the right to change the speci cation of any product without prior notice
2. SAFETY RULES
This technical datasheet must be read with particular attention to the safety warnings and operating
instructions listed in the ProSet XT1 and ProSet XT2 Instruction Manual, by any person  tting or
operating the nose assemblies and hand tools.
3. INTENT OF USE
The accessories in combination with the ProSet XT1 and ProSet XT2 tools are designed for placing Stanley
Engineered Fastening blind rivets only.